# Submersible Well Pump Replacement in Palatka

Submersible well pump replacement is the job when the pump at the bottom of your Palatka well has worn out. We pull the old pump, size the new one to your well and your house, and set a Pentair pump on sound drop pipe and wire.

## Signs the pump is wearing out

Pumps rarely die without warning. These are the signs we hear about before the call where the water stops.

- Water pressure that keeps getting weaker over weeks or months
- A pump that runs much longer than it used to, or never shuts off
- A breaker for the pump that trips again and again
- Taps that sputter and spit air
- An electric bill that has crept up with no other explanation
- A pump that has already been repaired more than once

## How we replace a submersible pump

1. **Test from the surface.** We check the power, the control box, the switch and the tank, so we only pull the pump when the pump is the problem.
2. **Pull it up.** Our truck lifts the pump, drop pipe and wire out of the well.
3. **Inspect the rest.** We check the pipe, the wire and the check valve for wear and replace what is worn.
4. **Set the new pump.** We set a Pentair pump sized to your well, with sealed waterproof splices.
5. **Tank and switch.** We test the pressure tank, recharge or replace it, and set the switch to match.
6. **Run it with you.** We bring the system up to pressure and run the house taps before we leave.

## Sizing the replacement

Bigger is not better with a well pump. The right pump moves the water your household uses at the pressure you want, without pulling the well down faster than the aquifer can refill it.

We look at how many bathrooms and people the house has, whether the well also feeds irrigation, how deep the pump sits and what the well can deliver. A pump that was wrong for the job the first time is a common reason the old one failed early, so we do not simply match the old label.

## Want steady pressure in every shower?

A standard system switches the pump fully on and fully off, so pressure rises and falls between two settings. A constant pressure system speeds the pump up and down to hold the pressure steady instead.

It costs more than a standard pump and switch, and it is not right for every well. Ask us about it when we quote, and we will tell you honestly whether it suits yours.

## Submersible pump questions

### How long does a pump replacement take?

Most replacements are finished in a single visit once we have the right pump on the truck.

### Do I need a new pressure tank too?

Not always. We test the tank's air charge and bladder, and only replace it if it has failed or is the wrong size for the new pump.

### Will a bigger pump give me more pressure?

House pressure is set by the pressure switch and tank. A pump that is too big for the well can actually make things worse by drawing the water level down.

### What size well pump do I need?

That comes from the well and the house: how deep the water sits, how far the pump pushes it, how many bathrooms and irrigation zones run at once, and the pressure you want at the tap. We work it out from measurements at your well, not from the label on the old pump.

### Is my well too old for a new pump?

If the casing is sound and the well still produces, a new pump is usually the right call. If the well itself is failing, we tell you before you spend money on a pump.

## Pump on its way out?

Call (904) 740-7867 for a free estimate. We test first, then quote the replacement in writing.

## More about your well pump

- [Replace a well pump in Palatka](https://replacewellpumppalatka.com/)
- [Well water treatment in Palatka](https://replacewellpumppalatka.com/well-water-treatment/)
- [Repair or replace your well pump?](https://replacewellpumppalatka.com/repair-or-replace-well-pump/)

---

Simply Well & Pump in Palatka, FL. Call (904) 740-7867.
Hours: Monday to Friday, 8 a.m. to 5 p.m.
Page: https://replacewellpumppalatka.com/submersible-pump-replacement/
